Fibreglass Honeycomb Fiberglass XPS Foam Sheets

FRP Fiberglass Honeycomb PanelFRP Fiberglass Honeycomb Panel is consisted of two FRP sheets as face sheets being laminated to a honeycomb core. We use two components PU glue to bond the 3 layers of material which provides a super bonding strength. FRP is fiberglass reinforced plastic which is a high strength, durable and chemical resistant material. And the FRP surface can be gel coated surface or rough surface without gel coat. While the honeycomb core can be aluminium honeycomb core or PP honeycomb core. And FRP honeycomb panel is used for vast applications, mainly for dry van truck body, building partition walls and substrate panel to glue stone or porcelain tiles etc. Our FRP honeycomb panel is manufactured through automatic glue spraying process & high pressure pressing process, life span is long. Specifications of FRP Fiberglass Honeycomb PanelPanel thickness10mm, 18mm, 20mm, 25mm or customized thicknessPanel width1000mm, 1220mm, 1500mm or customized widthsPanel length2440mm, 3200mm, 4000mm, 5800mm or customized lengthsFRP skin thickness1mm, 1.2mm, 1.5mm, 2mm, 3mm or customized thicknessHoneycomb coreVarious aluminium honeycomb core, or PP (polypropylene) honeycomb corePanel edgeStandard open edgesFRP patternsSmooth surfaces, pebbled surfacesColor optionsMatt gloss or high glossy colors: white, grey, black, red, blue etcGel coatGel coated or non gel coated optionalFiberglass typeschopped fiber, woven roving types Key Benefits of FRP Fiberglass Honeycomb PanelHigh strength Light weightThe hexagonal honeycomb structure provides excellent panel strength to support the fiberglass skin sheets. And the three layer structure provides super tensile strength between the skins to the core layer, making the panel stays at good strength over time. Owing to the hollow light weight structure of honeycomb core, the density of honeycomb panel is small and the weight for each square meter is low. The density for FRP per mm thick is only 1.4kg/m2, and aluminum honeycomb core is only around 35kgs/m3 (PP honeycomb core at 80kgs/m3).Highly durableStable qualityFRP face skins are made with mixture of fiberglass & high quality resin. The surfaces are strongly scratch resistant, high impact resistant, UV resistant & chemical resistant. The panels could last for decades under normal using conditions.Both the FRP (fiberglass reinforced plastic) and PP honeycomb core are thermoplastic, such panel components can perform mechanically & physically stable under a wide range of temperatures from -40ºC to +80ºC.Easy installationEasy maintenance Installation of honeycomb panels can be connected by using proper designs of aluminium extrusions along with screws or rivets.The FRP face skin sheets are not easy to get dirty. And FRP is water proof material, it's easy to clean with regular detergents & high-pressure washers. Patterns of FRP Fiberglass Honeycomb PanelApplications of FRP Fiberglass Honeycomb PanelWorkshop at a Glance Technical Data of FRP Fiberglass Honeycomb PanelBasic InformationItemValueTolerancePanel thickness10mm+/-0.2mmFRP skin thickess2mm (Top) + 2mm (Bottom)+/-0.03mmFiberglass typeChopped fiber / Woven   Roving Honeycomb coreAluminium Honeycomb A6*0.05 Panel width1220mm or customized+/-2mmPanel length2440mm or customized+/-4mmDiagonalN/A≤5mmFlatnessN/A