China Factory 1/2 Inch Pop up Plastic Scattering Sprinkler for Large Lawn

Product Description china factory 1/2 inch pop up plastic scattering sprinkler for large lawnntroducing our pop up rotor sprinkler, it is a must sprinkler for irrigation of green belt, flower bed, lawn, etcThis durable plastic rotor sprinkler The plastic parts are made of high-strength anti-aging engineeringolastics such as ABS and POM, and the lifting springs are made of stainless steel springs, The dirt on thelifting column can bequickly and automatically cleaned, which can adapt to the harsh field conditions and ensure the reliableoperationof the nozzle; A filter net is installed inside the lifting column to prevent the nozzle from being clogged, andthe nozzle and the filter net are convenient to be replaced; A filter net is installed inside the lifting column toprevent the nozzle from being clogged, and the nozzle and the filter net are convenient to be replaced; A/ariety of nozzle options, a variety of angle range options.The Rotor sprinkler is perfect tool for garden andlawn irrigation .PRODUCTS ADVANTAGE Sealing ring used by pop-up sprinkler is madefrom injection molding combined with chemicalmaterial and corrosion-resistant material. lt canbe stretched with water pressure, allowing morepop-up sprinkler to be installed in the same areaeven at low flow and pressure to reduce the cost,and can prevent ground dirt from entering the sealring and clogging the nozzle when the liftingcolumn is recovered. Pop-up sprinkler adopts an upgradedspring which is solid enough allowing itto stretch under any circumstance.The check valve used by pop-up sprinklercan avoid the water leakage and hydropsof low-lying pop-up sprinkler, prevent thewithered vegetation caused by long-termhydrops, and save water resources at the same time. Considering the worst condition including treadrolling with heavy machinery, we adopt highlysolid pop-up sprinkler body, furthermore, in orderto make the top of pop-up sprinkler can undertakethe heavy pressure, the sprinkler dead bodythread uses high tensile intensity design to keepthe pop-up sprinkler stretch tightly, and thenincrease the service life of the pop-up sprinkler Product Parameters  Working Specification  Inlet diameter1/2"Internal thread  FLOW0.1-1.3 m³/h RANGE2.5-5.0METER Recommended workpressure:1.8-4bar  performance The altitude of the product POP UP:   0/5cm/10cm/15cM/30CM  performance The altitude of the product base:   4.5CM/10CM/15CM/22.5CM/41CMWITH NOZZLES 8A10A12A15A17A     Throw range: 2.4Meter      Throw range 3.0Meter        Throw range 3.7MeterThrow range 4.6MeterThrow range 5.1 Meter                                                                                                                       The adjustable angle between :0-360°Elevation angle :0°Elevation angle :15°Elevation angle :28°Elevation angle :28°Elevation angle :28°       Spray angle           pressure  (bar)(meter) Throw range (m³/h)flow(meter) Throw range (m³/h)flow(meter) Throw range (m³/h)flow(meter) Throw range (m³/h)flow(meter) Throw range (m³/h)flow45º1.52.20.052.80.063.40.064.1 0.094.30.1622.40.063.0 0.073.70.094.30.134.70.192.52.60.073.20.073.90.114.60.145.10.2232.90.083.50.084.10.125.10.165.30.2690º1.52.20.12.80.113.40.134.1 0.204.30.2822.40.113.0 0.133.70.164.30.224.70.312.52.60.123.20.143.90.184.60.265.10.3532.90.133.50.154.10.225.10.295.30.38120º 1.52.20.122.80.143.40.184.1 0.264.30.3622.40.153.0 0.173.70.224.30.314.70.382.52.60.163.20.193.90.254.60.335.10.4332.90.183.50.214.10.295.10.385.30.49180º 1.52.20.182.80.213.40.254.1 0.384.30.5222.40.223.0 0.253.70.324.30.454.70.592.52.60.243.20.273.90.374.60.505.10.6532.90.263.50.304.10.425.10.575.30.70240º 1.52.20.242.80.283.40.324.1 0.504.30.6622.40.283.0 0.323.70.424.30.594.70.782.52.60.313.20.363.90.494.60.685.10.8532.90.353.50.414.10.565.10.755.30.92270º 1.52.20.282.80.313.40.374.1 0.584.30.7722.40.0323.0 0.363.70.464.30.684.70.882.52.60.353.20.403.90.544.60.775.10.9632.90.383.50.464.10.635.10.855.31.09360º 1.52.20.362.80.413.40.484.1 0.764.30.9822.40.423.0 0.473.70.614.30.894.71.142.52.60.473.20.533.90.724.61.005.11.2632.90.51 3.50.614.10.835.11.125.31.38    Company Profile  Our company is a professional facility agriculture and water-saving irrigation installation and design company for more then10 years. Our team has 2 chief engineers, 6 engineers, 6 projectmanagers, and 12 techniciansUndertake all kinds of irrigation,water and fertilizer integration smart digital agriculture,agricultural Internet of Things project engineering design andconstruction. And We have4000 square meters of qualityinspection workshop.we have strong supplier internet and strongTechnical Support For our customersWe Provide one-stoppackaging service for projects, welcome to call.  /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1