16mm Drip Zone Fitting Drip Irrigation Pipe Irrigation System Agriculture

Product Description Droppers are represented by devices with small tubes at the end of products. They cut into holes in a pipe or hose and regulate the amount of water supplied.There are several types of products. You can choose the right one based on the type of plants you grow and the dimensions of your greenhouse. Droppers are of two types: compensated and non-compensated. The first option is equipped with a valve and a membrane. Thanks to this, water is dosed into the installation at different pressures. The devices are equipped with an anti-drainage system, so the pressure in them does not drop to zero when the water is turned off. When the system is switched on again, there is no start time delay due to air extrusion.We believe this option is more suitable for areas with elevation changes. The volume of water supplied by uncompensated devices at the beginning of the row will be greater than at the end. Droppers are produced with manual adjustment or a fixed volume of water supply, which is indicated on the package. This value is in the range of 1-3 l/h. There are also spider-type models with dispensers that allow you to water several plants at once. These devices are the most expensive. They are located at a great distance from each other. It is advisable to use this system for watering perennial plants. Note! When choosing droppers, you should pay attention to the possibility of disassembling the structure. Check that you can easily remove the cover. This is necessary so that you can clean the inside of the device. We recommend installing droppers at a distance of 25-30 cm from each other. This step is the most preferred for most plants. However, for irrigation of root crops, the distance between droppers should be 20 cm, for melons - 1 m.  Company Profile/* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1