Water Flow Pressure Switch/ Sensor for Heat Pumps/ Cooling Circuits/ Heating Systems

    BannerProduct DescriptionWater Flow Pressure Switch/ Sensor for Heat Pumps/ Cooling Circuits/ Heating Systems>> General The paddle type SPDT HFS series are designed to provide excellent performance where accuracy, reliability, and rugged construction (IP54)are required used in liquid flow lines carrying water or any fluid neither harmful to brass and prosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate. The series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0 degree C. These series may be used on liquids with high salt or chlorine content but is not for use in hazardous atmospheres. They may be also used outdoors but must be protected from weather or splashing water. All series flow switches are designed for use only as operating controls. Where an operating control failure would result in personal injury and/or loss of property, it is the responsibility of user to add safety devices that protect against, or supervisory systems that warn of control failure.   >> Specification Operating Pressure10kgf/cm² (1MPa)Withstand Pressure17.5Kgf/cm² (1.75MPa)Insulation ResistenceOver 100Ω, DC500VMWithstand VoltageAC1500V/1minuteContact Point Life1000K CycleBellows Life500K CycleTemperature of FluidMax 100°C (212°F)Body Size1"(HTW-WS-25), 3/4"(HTW-WS-20),1/2"(HTW-WS-15)certifiatesFactory Show FAQ    /* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1