18650 Cell Lithium 36V 9ah Li-ion Battery Pack for E-Bike

36V 9Ah power lithium battery lifepo4 for e-bike   Battery group specifications CellmodelGLP10Ah-7768256Capacity(0.5C)≥9Ahrated voltage(V)3.2VTypical Impedance (mΩ)≤5mΩBattery materialNMC cathode material PACKCombination method1P12SMinimal capacity(0.5C)9AhNominal voltage36VMax. charge voltage43.8VDischarge cut-off voltage≤30VMax Charge current  5A(0.5C)Max Working current15A(1.5C)Standard charge current0.3CStandard charge current0.5CPack Impedance standard≤100mΩWeight (Approx.)4KgMax. dimension(L×W×H)(mm)76*107*380 Operating  temperatureCharge temperature0ºC~45ºCDischarge temperature-20ºC~60ºC  BMSSingle cell over-charge cut-off voltage3.7Vover-charge release voltage3.6VSingle cell under-discharge cut-off voltage2.5VDischarge release voltage2.7VOver-discharge cut-off current40AOver-discharge cut-off current delay1.5SShort-circuit protection45AShort-circuit protection delay500uS Condition for the recovery of over-current and Short-circuit Balance current40-50mABalance Condition3.6 Caution:1.Do not dismantle, open or shred the batteries.2.Do not expose batteries to heat or fire. Avoid storage in direct sun light.3 .Do not short-circuit the battery,Do not store batteries haphazardly in a box or drawer where they may be short-circuited by other metal objects.4 Forbid confusedly using the charge socket and discharge socket, or accidents may occurred.5.Do not subject batteries to mechanical shock.6.In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.7.Observe the plus (+) and minus (-) marks on the battery and equipment and ensure correct use.8.Keep batteries out of the reach of children.9.Keep batteries clean and dry.10.Wipe the battery terminal s with a clean dry cloth if they become dirty.11 .Batteries need to be charged before use. Always use the correct charger and refer to the manufacturer's instructions or equipment manual for proper charging instructions.12.Do not leave a battery on prolonged charge when not in use.13 .After extended periods of storage, it is necessary to charge and discharge the batteries several times to obtain maximum performance.14 .The batteries give their best performance when they are operated at normal room temperature (20 °C ± 5 °C).15.Retain the original product literature for future reference.16.Use only the battery in the application for which it was intended.17 When possible, remove the battery from the equipment when not in use.18. Dispose of properly.19. Cells used as E-motor or storage power should be matched with controller or related equipment..Because the battery piles are matched with protection board,you can not drive the pure inductance equipment otherwise you could damage the whole system./* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1