Kj3.5lm (A) Miner′s Cap Lamp Miner′s Lamp Miner′s Safety Lamp

KJ3.5LM(A) Miner's Cap Lamp Miner's Lamp Miner's Safety Lamp1. Application and characteristic KJ3.5LM(A) is special illuminating lamp for workers carrying individually under mine. This series is our new self-designed generation product. It adopts Ni-MH battery, LED double light sources, with smart size and light weight, free maintenance NI-MH battery, and long lifeLED.2.Working conditions Temperature: 0-40ºC   3. Specs and signification      K   J  3.5  L   M  ( )                               Design serial No.                               Free of maintenance                               LED light source                               Rated capacity (Ah)                               NI-MH Battery                               Mining safety lamp  4. Standard GB 7597-2003 General Requirement for Miner's Lamp Safety MT 242-2004 KJ Series Miner's Lamp Q/JY 069-2006 KJ Series Miner's Lamp5. Explosion-proof type: Exs IStructure 1. This series lamp is portable, the lamp head and battery part are connected by cable's upper cover to be a whole miner's lamp. Lamp head could be fixed on cap lamp. 2. A LED main light source is installed in, K3.5LM(A), several LED auxiliary light sources. Clockwise turn on switch, main source and auxiliary sources illuminate alternatively. 3. This battery case is designed with closed wear-ring, convenient for carrying. 4. This lamp head is designed with charging device, matching with charging set, convenient and reliable for charging. 5. PTC self-protection is set between battery group, and reusable short circuit protective device is set on cable's battery end. Thus, this is very safe and reliable.Technical ParameterNo.Rated capacity (Ah)Rated voltage (V)Lighting timeLED main light source parameterLife of serviceValid storage periodWeight (g)Voltage (V)Current (A)Luminance(lx)Lighting startLighting 15h13.53.6≥183.60.246004500800half a year500Usage and maintenance 1. The battery is charged with more than 1/4 power when shipped out of factory, turn on the switch to make sure it can illuminate normally. If it was in good condition, charge and use it. Follow the charging set user manual, connect to power supply, plug lamp head into charging socket, clockwise turn 180 degree to make charging points contact well, watch whether the indicator is normal. It will take 8-10 hours to be charged fully. 2. Charge with matched charging set or unit charger. 3. Please turn off lamp when charging. 4. If any damage happened in using, give it to check department after leaving mine well, and maintain by professional person with special tool, don't open lamp yourself, especially under mine. 5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacity and life of service would be reduced. 6. If lamp head happened short circuit in maintenance or other operation, disposal the faulty, and restart the lamp, it will work normally. 7. If the lamp was not used usually, please charge per three months in storage period. 8. Don't acutely knock or collide lamp in carrying or using, to avoid damage to any parts to affect normal warning./* January 22, 2024 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1